The Physical Interaction Layer For AI.

OnRobot builds the full end of arm tooling stack for collaborative robots one vendor, one programming interface, plug-and-produce deployment. The 2FG14 delivers up to 14kg force-fit / 20kg form fit grasping at 280N, while the 3FG15 and Soft Gripper handle irregular and delicate parts a standard two finger tool would drop. Vacuum and adhesive tools (VG10, VGC10, Gecko) extend into flat and flexible materials, the HEX Force/Torque Sensor and OnRobot Eyes 2.5D Vision add contact and perception feedback, and the Quick Changer swaps tools in under 5 seconds. The D:PLOY software platform packages palletizing, machine tending, and transferring into ready to deploy applications validated on real floors.

MAX GRASP
0
MAX GRIPPING FORCE
0 N
TOOL CHANGE TIME
< 0 s
LIFT100 STROKE
0 mm
TOOL CATEGORIES
0
QUICK CHANGER PAYLOAD
0 kg

AI-Powered Robotics *

Autonomous Systems *

Industrial Automation *

Computer Vision *

Machine Learning Integration *

Next-Gen Robotics Solutions *

One vendor, every end effector you'll need.

Most cells end up stitching together grippers, sensors, and software from different suppliers. OnRobot built the opposite: grippers, vacuum and magnetic tools, force/torque sensing, vision, and a quick-change ecosystem that all run through one programming interface. That's the physical interaction layer physical AI depends on  feedback rich tooling at the point of contact, not just a model deciding what to do.

One Tool Changer. Every Cobot Brand.

Every OnRobot product the 2FG7, 2FG14, 3FG15/25, Soft Gripper, VG10/VGC10 vacuum grippers, HEX Force/Torque Sensor, and Eyes 2.5D Vision mounts through the same Quick Changer in under 5 seconds, with zero rewiring and zero reprogramming between tool swaps. The Dual Quick Changer lets one arm carry two tools at once for a 30kg combined payload, and LIFT100 adds a 900mm robot elevator on top of any cell without extra controllers. All of it plugs natively into UR, Doosan, Fanuc, ABB, KUKA, and Techman no brand specific brackets, no custom I/O mapping. 

Give Physical AI A Sense Of Grip.

Physical AI can decide what to pick, but without the right grip, it can’t hold it. OnRobot’s gripper range covers every object type a cell will meet: the 2FG7 and 2FG14 two finger grippers handle rigid parts up to 20kg form fit, the 3FG15 and 3FG25 three finger grippers center cylindrical and irregular objects automatically, and the Soft Gripper flexes around delicate or fragile items without crushing them. For non rigid and porous surfaces, the VG10, VGC10, and VGP20 vacuum grippers lift up to 15kg off cardboard, fabric, and film. Every gripper reports force and position feedback in real time, so physical AI systems don’t just move to a part they feel when they’ve actually got it.

Force, Torque, And Vision. Built In.

A gripper without feedback is just a clamp. OnRobot’s sensor range gives every cobot cell the data layer physical AI needs to act with precision. The HEX 6 Axis Force/Torque Sensor measures force and torque across all six axes simultaneously, enabling delicate insertion, polishing, and deburring tasks where a fixed-force clamp would snap the part. OnRobot Eyes, a 2.5D vision system, locates and verifies parts in the workspace before the arm ever moves, cutting blind pick attempts on mixed-SKU lines. Both mount through the same Quick Changer as every OnRobot gripper, so a cell can add perception and force sensing without a rewire or a new controller deployed across 350+ partners from assembly lines to quality inspection stations.

Quick Changer. The Hardware Behind Every Swap.

OnRobot’s mounting hardware is what makes a one vendor tool stack actually work on the floor. The Quick Changer locks any gripper, sensor, or vision module to the robot flange in under 5 seconds, rated for 25kg payload with zero manual calibration after a swap. The Dual Quick Changer and Dual Mounting Kit let a single arm carry two tools simultaneously for a combined 30kg payload, cutting the need for a second robot on multi step tasks. LIFT100, a compact robot elevator, adds 900mm of vertical stroke under a 100kg payload so a fixed height cobot can reach pallet to shelf without a larger arm. Pallet Station rounds out the range with a dedicated interface for palletizing cells. All of it mounts across UR, Doosan, Fanuc, ABB, KUKA, and Techman without custom brackets.

Our Products

Unitree H2 Plus.

Full-stack humanoid development platform — every spec that matters.

SPECIFICATION

H2 PLUS

DEGREES OF FREEDOM

Total DoF

75(body + hands)

Body DoF

31 · aerospace-grade actuators

Per-hand DoF

22(SharpaWave)

TORQUE & PAYLOAD

Peak leg torque

360 N·m

Hand grip force

150 N per hand

Grip, Sense, Lift. Six,One System. .

What OnRobot actually ships — from fingertip grippers to full-cell software.

One Vendor, Every Tool

Grippers, sensors, vision, mounting, and software all built to share one Quick Changer standard.

Two & Three Finger Grippers

2FG7 · 2FG14 · 3FG15/25 · up to 20kg form-fit payload for rigid and irregular parts

Vacuum & Soft Grippers

MG400 · 4 axis · agile pick and place for tight spaces

Force/Torque & Vision Sensing

HEX 6-Axis F/T Sensor · OnRobot Eyes 2.5D Vision · real-time feedback for precision tasks

Quick Changer & Mounting Hardware

5-second tool swap · Dual Quick Changer (30kg) · LIFT100 elevator (900mm, 100kg)

D:PLOY Software

No code configuration for palletizing, machine tending, packaging, and transferring applications

Where OnRobotworks.

Shop floor teams adding a cobot for the first time, needing a gripper that mounts and runs in a day no custom bracket, no dedicated integration engineer on staff.

Small & Mid-Size Manufacturers

Shop-floor teams automating repetitive tasks for the first time CRA and Nova cobots that install and program through DobotLab in hours, without a dedicated robotics engineer on staff.

Food, Beverage & Consumer Goods

Lines handling delicate or variable products cosmetics formulas, bottled goods, packaged food where Soft Gripper and vacuum tooling replace fixed-force clamps.

System Integrators & OEMs

Integrators building cells across UR, Doosan, Fanuc, and ABB who need one tooling standard instead of re-engineering mounts for every robot brand they deploy.

Logistics & Distribution Centers

Warehouses and distribution hubs running palletizing and case handling cells, configured through D:PLOY software instead of custom robot programming.

OnRobot Questions, answered.

Two and three-finger grippers (2FG7, 2FG14, 3FG15, 3FG25) handle rigid and irregular parts with form-fit or force-fit grip up to 20kg. Vacuum grippers (VG10, VGC10, VGP20) handle flat, porous, or non-rigid surfaces like cardboard and fabric. The Soft Gripper flexes around delicate items without a fixed clamping force. Most cells run two or three of these interchangeably through the same Quick Changer.

 

Yes. Every OnRobot gripper, sensor, and vision module mounts through the Quick Changer, which is compatible with UR, Doosan, Fanuc, ABB, KUKA, and Techman cobots no custom brackets or brand-specific wiring required.

 

D:PLOY is OnRobot’s no-code configuration software for palletizing, machine tending, packaging, and transferring applications. It replaces manual robot programming with guided setup, so a cell can be reconfigured for a new task without a dedicated programmer.

The Quick Changer swaps a gripper, sensor, or vision module in under 5 seconds with no recalibration. The Dual Quick Changer goes further, letting one arm carry two tools at once for a combined 30kg payload.

Deploy an H2 Plus.

Tell us the programme — research group, OEM integration, embodied-AI startup — and we’ll drop an INR proposal into your inbox with GST invoice, KYC, AMC and pan-India delivery.

Get in Touch!

    Unable to find What you're looking for?

    We’d love to hear from you! At Unbox Industry, we believe in the power of communication…

    Get in Touch!